Flat Roof Construction – The Different Techniques Available

Okay, so you’ve agreed to do your bit to help reduce carbon emissions and avoid global warming. You have decided to have a large solar panel installed on your roof so that you can use solar energy for lighting and heating. If your home has a slanting roof, this will be impossible. Have a look at Roofer Port St. Lucie for more info on this. A flat roof construction has many advantages, one of which is that it facilitates the installation of a solar panel to harness the natural source of electricity. You have a variety of options when it comes to techniques. Let’s take a look at three of the most common strategies that are being used by people all over the world.

Roofing Membrane

Membrane roofs are the best choice if you want a long-lasting roof that is also resistant to water. Multiple polyvinyl chloride sheets are used to make this flat roof. Each sheet used in this construction ranged in thickness from 30mm to 60mm. Prior to installing membrane roofing, you do not need to mount a separate moisture resistant barrier on the roof. These membranes can be installed directly on the roof, along with insulation to provide thermal resistance. The membranes are bonded together after they have been assembled. You can either use a special sealer to help the sheets chemically bind together, or you can heat the seams until they melt into each other and stay in place.

Roofing that has been built up

Built-up roofing is the oldest and most common roofing method in the United States. Until continuing with built-up roofing, moisture barriers are mounted over the roof. Over the moisture barrier, alternating layers of waterproofing elements and bitumen are placed. The roofing’s consistency is determined by the number of layers. The higher the number of layers, the higher the roofing’s consistency.

Roofs Made of Spray Foam

This is a form of flat roof construction that uses polyurethane foam to provide a protective covering for the roof. The roof is insulated with rigid foam insulation sheets. The next step in this procedure is to make a foam solution and use a spray gun to apply it to the roof. The thickness of the spray foam roof varies over the entire surface to allow for proper drainage. The spray foam roof is kept in place by an elastomeric coating. It also aids in the prevention of fires and provides water resistance.