Facts about home Westport Hardwood Floor Refinishing

Measure the space in which the wood flooring will be placed, add 10 percent to 15 percent for errors that can occur later on when cutting the flooring or replacement. Our website provides info about Westport Hardwood Floor Refinishing.
You may need to remove any flooring or carpeting that is in the installation room along with the base boards by checking out the sub floor. Make sure the floor is clear, and with a 3-inch overlap, put down the vapour barrier. Using tar paper or felt as the barrier to vapour. The old flooring material would have to be taken to the landfill, and for the use of their facilities, most waste shelters charge a fee. Know that the elbows, back, neck and shoulders would be sore if you instal the flooring. If a licenced wood floor construction firm installed the flooring, they will vacuum up all the old flooring or carpeting in a short period of time. The business will dispose of the old materials as well. The refuge operation fee will save you this.
Mark where the floor joists are and begin the setup. Snap a chalk line 3⁄4″ from the wall, enabling the floor to shift and expand with the humidity. Align the edge of the board with the chalk line and screw the boards down through the board and into the sub-floor and floor joist. Once the first row is completed, follow this method. Make sure that the first boards are laid at a 90 degree angle to the underlying floor joist. Screw the boa
Until you get to the last row, continue this process. Be sure to make sure that the ends exactly line up. This will make the floor smooth, and less filler will be used. The last row will be narrower and it will be appropriate to trim the board to match. Measure the area and trim to suit the board. With wood putty, fill some of the gaps. Fill in the hole and clean the excess off.