All about Plantation Shutters Bath

Traditional plantation shutters have a rather simple design. Plantation shutters normally are made up of a set of full-length vertical panels, and can be divided into four main parts: The horizontal slats found on the top and bottom of the shutter are referred to as the ‘rails’. Some plantation shutters may also contain one or more horizontal rails in the center of the shutter, dividing the plantation shutter into separate tiers. Our website provides info about Plantation Shutters Bath.
Located on the sides of the shutter, are vertical ‘stiles’. ‘Louvers’ are the parallel slats found between the stiles, which are able to be tilted and adjusted to allow in more or less light. Louvers can be made in a number of various sizes and shapes.
The ’tilt rod’ is the mechanism which controls the movement of the louvers. These also come in a variety of styles. Single tilt rods are one continuous, vertical rod connecting and controlling all the louvers simultaneously. A split tilt rod is exactly that: a tilt rod split into individual pieces. This allows separate control of several tiers found on one shutter panel, for example, adjusting the top tier to allow in more light, while keeping a lower tier’s louvers closed, for privacy.
Hidden tilt rods allow the apparatus to be discreetly concealed behind the shutter panel.
Where did plantation shutters come from?
Shutters have been used for many, many centuries. Some experts claim that they were used as far back as ancient Greece, with slats being made from marble slabs. They were used before glass was available, to provide protection from the elements, such as rain, wind, and direct heat from the sun’s rays. They also effectively guarded against insects and small animals entering the building. The real function of the shutters was appreciated when these elements and pests passed, and the shutters could be opened, allowing for fresh sunlight and a cool breeze to ventilate the establishment.